It’s the end of another hard day at work, and you’re ready to put up your feet and watch an episode of your favorite TV show. But when you click the power button on the remote, nothing happens. The TV screen is blank and is unable to turn on, no matter how many times you click the power button.
So what exactly should you do when your TV won’t turn on?
1. Rule Out a Source Issue
In some cases, you may think your TV hasn’t turned on when, in fact, it’s on but simply showing a black screen. If your TV is stuck on a black screen, it could be a source issue rather than an issue with the power. To figure out which it is, click the menu button on your remote. If the menu pops up against the black screen, then the issue isn’t related to power. Instead, it may be a problem with your cable or satellite TV service.
2. Try the TV’s Hardwired Power Button
If your remote control is faulty or the battery is dead, it may trick you into thinking your TV is to blame. Set aside the remote and try to turn on the TV via the onboard power button. Some modern televisions hide the power button on the back or side of the case, so you may have to do a little searching if you’re used to using the remote control. If the button works, then your remote may need a new set of batteries.
3. Check the Power Cord
A loose power cord can prevent your TV from turning on. Most modern TVs are built with a detachable power cord instead of a cord that’s been hardwired to the TV. Unplug the power cord from the back and reconnect it again so it has a snug connection with the TV. Be sure to check that the cord hasn’t wiggled loose from the wall outlet, as well; this is a common occurrence in households with pets, small children, or where vacuuming takes place near the TV. Once you’ve confirmed the TV is plugged in properly, hit the power button to see if this solves the issue.
5. Try a New Outlet
What you suspect to be an issue with your TV may actually be a problem with the outlet it’s plugged in to. Luckily, this is an easy theory to test. Move the power cord to a new outlet and test the TV to see if it turns on. Be aware of switch outlets and power strips as well, as these can both pose additional challenges to powering up your TV.
5. Power Cycle the TV
We’re all familiar with the IT joke, “have you tried turning it off and on again?” Although it may sound silly, there’s real wisdom behind that advice when it comes to power cycling an electronic device. Plus, it’s easy enough to try at home in just a couple of minutes. To get started, simply unplug the television’s power cord from the outlet. While it’s disconnected, press and hold the TV’s power button for about ten seconds. Once that’s done, plug the TV back in and try to turn it on once more.
Is Your TV Working Now?
With any luck, your TV is back up and running again after trying out the steps outlined above. However, if you’re still staring at a blank screen and wondering what went wrong, it’s time to call the professionals. Compare quotes from a few local companies like TV Repair Pittsburgh and choose the one that offers fast, reliable TV repairs to homeowners and businesses near you.